Ambient Weather WS-09 User Manual download pdf (Page 2)

1 Introduction

Thank you for your purchase of the Ambient Weather F007T 8-Channel Wireless Thermometer. The

following user guide provides step by step instructions for installation, operation and troubleshooting.

To download the latest manual and additional troubleshooting tips, please visit the FAQ website:

http://ambientweather.wikispaces.com/f007t

The F007T transmits wirelessly to any compatible Ambient Weather receiver, including the WS-07,

WS-08, WS-09 and WS-10 wireless weather station display consoles. Other console models may be

added later, and will be listed on the FAQ website.

2 Getting Started

Note: The power up sequence must be performed in the order shown in this section (insert

batteries in the remote transmitter(s) first, Display Console second).

2.1 Parts List

QTY

Item

Thermometer transmitter (FT007T)

Dimensions (LxHxW): 4.5” x 2.0” x 0.75”

User Manual

2.2 Probe Thermometer Sensor Set Up

Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for temperature

ranges between -4 °F and 140 °F and fresh lithium batteries for temperature ranges between -40 °F

and 140 °F.

1. Remove the battery door on the back of the sensor by removing the set screw, as shown in

Figure 1 .

Figure 1

2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the

transmitter.

1 2 3 4 5 6 7

No comments

Ambient Weather WS-09 User Manual Page 2